CyberView CST 7001 Bedienungsanleitung PDF herunterladen (Seite 12)

Cyberview scanner and thermal printer - Installation and User Manual 15 October 2007

Commercial-in-Confidence Page 12 of 43

IF the above values are not configured, set them as in the following:

a) Click Change Setting...

b) Use the drop-down arrow to select a Basic Configuration 000x.

Image 4

Image 5

c) If DMA shows a „?‟ then double-click it to display the dialog shown in image 5. Set the value to

3 and ensure that Conflict Information field displays: No devices are conflicting.

IF port configuration problems occur, check:

a) BIOS: If appropriate, make setting changes to the BIOS.

b) If settings must be made, ensure that ECP, Interrupt and DMA are selected.

c) Ensure that the parallel port is a motherboard-based port, and not an add-on PCI card.

9. Reboot the PC.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 42 43

Keine Kommentare

CyberView CST 7001 Bedienungsanleitung Seite 12